Magnolia Plastics
Electrically & Thermally Conductive Compound
Magnobond 106-167, Parts A & B

Plastics for the Space Age Since 1957


Magnobond 106-167, Parts A & B

DESCRIPTION

Magnolia 106-167, Parts A & B, is a fast curing potting compound designed to protect electronic components.

PRODUCT SYNOPSIS 
Specific Gravity:                  Cure Schedule:  20-30 minutes = Set

 A:  Compound      1.1               24 hours = full cure             
                                                                      
 B:  Curing Agent  1.0                                                

     Mix           1.1             Shelf Life:  A: 6 mos.  B: 6 mos.  

Viscosity @ 77°F:                  Properties Before Cured:

 A:  Compound       800            SPI Classification: A:  4   B:  4  

 B:  Curing Agent 1,000            Flash Point: A: >200°F  B: >200°F  


     Mix            800            Flammable:         YES       YES
                                   Under 100°F:   A:   NO    B:  NO

Mix Ratio:                         Combustible:       YES       YES
100:33     Parts by Weight, A:B      100-200°F:   A:   NO    B:  NO

           Parts by Volume, A:B     Corrosive:        YES       YES
                                                  A:   NO    B:  NO

Pot Life @ 77°F:   5 minutes  Freight Class:  A:     1      B:    2
OTHER PROPERTIES AND INFORMATION 
STIR PART A BEFORE USING

     Gel Time @ 25°C           30 gram mass     7 minutes 20 seconds
                               60 gram mass     7 minutes 15 seconds
                              100 gram mass     7 minutes 10 seconds

     Specific Gravity @ 25°C      A: 1.10
                                  B: 1.00
                                Mix: 1.10

     Viscosity @ 25°C             A:   800 cps
                                  B:  1000 cps
                                Mix:   800 cps

     Storage Life @ 25°C          A:  6 months @ R.T.
                                  B:  6 months @ R.T.

     Flash Point                  A: > 200°F
                                  B: > 200°F

Tensile Strength @ 25°C (ASTM D-638)        6360 psi
Tensile Elongation @ 25°C (ASTM D-638)      3.75%
Shore Hardness     @ 150°C        88A
    (ASTM D-2240)     25°C        85D
                     -50°C        90D

Water Absorption @ 25°C (ASTM D-570)             + .919%
Dielectric Constant @ 1 Khz @ 25°C (ASTM D-150)   3.4  9
Dissipation Factor @ 1 Khz @ 25°C (ASTM D-150)     .01
Volume Resistivity (OHM-cm @ 30°C) (ASTM D-257)   2.04 X 1015
Full Cure Schedule @ 25°C - 7 days @ R.T.

Directions for use:  Mix Ratio
     By weight - 3:1
     By volume - 3.3:1
Spec Sheet Dated: 01/25/93

For more information, contact us at:

How To Order:

Doing Business with Magnolia Plastics



Return to Magnolia Plastics Home Page

Copyright © 1996, Magnolia Plastics, Inc. All Rights Reserved, including the right of reproduction in whole or in part in any form. The stylized Magnolia Plastics logo is a regsitered trademark of Magnolia Plastics, Inc.

Contact Magnolia at sales@magnapoxy.com
Web Page Construction and Maintenance By: IFDS Enterprises, Inc.
Updated: September 26, 1996