Magnolia Plastics Magnobond 1065-7
Plastics for the Space Age Since 1957
Magnobond 1065-7, Parts A & B
DESCRIPTION
Magnobond 1065-7, A/B is a two part epoxy surface coat that is designed for
use on laminated tools that operate at elevated temperatures.
PRODUCT SYNOPSIS
Specific Gravity: Cure Schedule:Tack out time - 3-4
hours. Full cure: use recommended
A: Compound 1.70 schedule for laminating resin
B: Curing Agent 1.00
Mix 1.60 Shelf Life: A: 6 mos. B: 6 mos.
@ 40°F or below @ R.T.
Viscosity @ 77°F: Properties Before Cured:
A: Compound 85,000 cps SPI Classification: A: 4 B: 4
B: Curing Agent 100 cps Flash Point: A: >200°F B: >200°F
Mix 10,000 cps Flammable: YES YES
Under 100°F: A: NO B: NO
Mix Ratio: Combustible: YES YES
100:12 Parts by Weight, A:B 100-200°F: A: NO B: NO
Parts by Volume, A:B Corrosive: YES YES
A: NO B: NO
Pot Life @ 77°F:________________ Freight Class: A: 1 B: 2
CAUTION
Magnobond 1065-7, A/B is very exothermic. Great care should
be taken to ensure that the material is not cast or allowed to sit in
sections over 1/2".
Spec Sheet Dated: 11/22/95
For more information, contact us at:
Sales Division
Magnolia Plastics, Inc.
5547 Peachtree Industrial Boulevard
Chamblee, GA 30341-2296 USA
770-451-2777, Voice
770-451-5376, FAX
800-831-8031, Voice
Email: sales@magnapoxy.com
How To Order:
Doing Business with Magnolia Plastics
Return to Magnolia Plastics Home Page
Copyright © 1996, Magnolia Plastics, Inc. All Rights Reserved, including
the right of reproduction in whole or in part in any form. The stylized Magnolia Plastics logo is a
regsitered trademark of Magnolia Plastics, Inc.
Contact Magnolia at sales@magnapoxy.com
Updated: September 26, 1996
