Magnolia Plastics Syntactic 108

Plastics for the Space Age Since 1957


Magnobond 108, Parts A & B
(Formerly called 105-174, Parts A & B)

DESCRIPTION

Magnolia 108, A & B is a lightweight, two component epoxy adhesive designed to meet the requirements of STM 22-602, Revision F, Type VIII, Grade B.

PRODUCT SYNOPSIS 
Specific Gravity:            Cure Schedule:  5 hours @ R.T.    

 A:  Compound     0.60         plus 1 hour @ 160°F             


 B:  Curing Agent 1.20                                         

     Mix          0.67       Shelf Life:  A: 06 mos. B: 06 mos.


Viscosity @ 77°F:            PROPERTIES BEFORE CURED:

 A:  Compound    Paste       SPI Classification: A: 4   B:   4 

 B:  Curing Agent  Paste     Flash Point: A:  >200°F B:  >200°F

     Mix           Paste     Flammable:           YES       YES
                              Under 100°F:   A:   NO    B:  NO
Mix Ratio:
                             Combustible:         YES       YES
100:18 Parts by weight, A:B    100-200°F:     A:  NO     B: NO

       Parts by volume, A:B   Corrosive:          YES       YES
                                             A:   NO    B:  NO
3 oz.
Pot Life @ 77°F:  29 minutes  Freight Class:  A:    1   B:  2
OTHER PROPERTIES AND INFORMATION 
Water Absorption
    (24 hours @ R.T.)   0.0376%
Compression Strength @ R.T.
    (1/2 X 1/2 X 1")         Ultimate Compression - 5602 psi
                             Compressive Modulus - 433,814 psi
                             % deformation @ 1750 psi 0.004 in.
Adhesive Strength    1230 psi
Flammability (60 second vertical)
              Self Extinguishing Time   - 0 seconds
              Burn length               - 4 inches
              Drip Extinguishing Time   - 0 seconds

Lap Shear Strength @ R.T. (ASTM D-1002) - 1800 psi
Spec Sheet Dated: 02/03/93

For more information, contact us at:

How To Order:

Doing Business with Magnolia Plastics



Return to Magnolia Plastics Home Page

Copyright © 1996, Magnolia Plastics, Inc. All Rights Reserved, including the right of reproduction in whole or in part in any form. The stylized Magnolia Plastics logo is a regsitered trademark of Magnolia Plastics, Inc.

Contact Magnolia at sales@magnapoxy.com
Web Page Construction and Maintenance By: IFDS Enterprises, Inc.
Updated: September 26, 1996