Magnolia Plastics Syntactic 109

Plastics for the Space Age Since 1957


Magnobond 109, Parts A & B
(Formerly called 105-176, A & B)

DESCRIPTION

Magnolia 109, A & B is a lightweight, two component epoxy adhesive designed to meet the requirements of STM 22-602, Revision F. Type IX, Grade D, Class I.
PRODUCT SYNOPSIS 
Specific Gravity:            Cure Schedule:  5 hours @ R.T.    

 A:  Compound     0.74         plus 1 hour @ 160°F             

 B:  Curing Agent 1.00                                         

     Mix          0.76       Shelf Life:  A: 06 mos. B: 06 mos.

Viscosity @ 77°F:            PROPERTIES BEFORE CURED:

 A:  Compound    Paste       SPI Classification: A: 4   B:   4 

 B:  Curing Agent 3000 cps   Flash Point: A:  >200°F B:  >200°F

     Mix      100,000 cps    Flammable:           YES       YES
                              Under 100°F:   A:   NO    B:  NO
Mix Ratio:
                             Combustible:         YES       YES
100:14 Parts by weight, A:B    100-200°F:     A:  NO     B: NO

       Parts by volume, A:B   Corrosive:          YES       YES
                                             A:   NO    B:  NO
3 oz.
Pot Life @ 77°F:  29 minutes  Freight Class:  A:    1   B:  2
OTHER PROPERTIES AND INFORMATION 
Water Absorption
    (24 hours @ R.T.)   0.026%
Compression Strength @ R.T.
    (1/2 X 1/2 X 1")         Ultimate Compression - 6964 psi
                             Compressive Modulus - 376,216 psi
                             % deformation @ 4500 psi 0.012 in.
Adhesive Strength    1100 psi
Flammability (12 second vertical)
              Self Extinguishing Time   - 2 seconds
              Burn length               - 2-1/2 inches
              Drip Extinguishing Time   - 0 seconds
Spec Sheet Dated: 02/03/93

For more information, contact us at:

How To Order:

Doing Business with Magnolia Plastics



Return to Magnolia Plastics Home Page

Copyright © 1996, Magnolia Plastics, Inc. All Rights Reserved, including the right of reproduction in whole or in part in any form. The stylized Magnolia Plastics logo is a regsitered trademark of Magnolia Plastics, Inc.

Contact Magnolia at sales@magnapoxy.com
Web Page Construction and Maintenance By: IFDS Enterprises, Inc.
Updated: September 26, 1996