Magnolia Plastics Magnobond 40

Plastics for the Space Age Since 1957


Quick Curing Epoxy
Magnobond 40, Parts A & B


DESCRIPTION

Magnobond 40, Parts A and B, is a two part epoxy characterized by a short pot life and quick cure time. Magnobond 40 is a non-asbestos version of Magnobond 38-R3, Parts A and B.


PRODUCT SYNOPSIS 
      Specific Gravity:

	A. Compound:      1.4
	B. Curing Agent:  1.4
	   Mix:           1.4

      Viscosity @ 77°F:

	A. Compound:      348,000 cps
	B. Curing Agent:  292,000 cps
	   Mix:           

      Mix Ratio:          1:1 Parts By Volume

      3 Oz. 
      Pot Life @ 77°F:    7 minutes

      Cure Schedule:      Set: 20 minutes @ 77°F.  
		  	  Semi-cure:  16 hours @ 77°F.
		  	  Full cure:  7 days @ 77°F.

      Shelf Life:         A: 6 months; B: 6 months

PROPERTIES BEFORE CURED 
      SPI Classification:     A: 2;    B: 2
      Flash Point:            A: > 200°F;  B: > 200°F
      Flammable Under 100°F:  A: NO;    B:  NO
      Combustible 100-200°F:  A: NO;    B:  NO
      Corrosive:              A: NO;    B:  NO
      Freight Class:          A: 1;     B: 1

OTHER PROPERTIES AND INFORMATION 
	Color	A:	Whilte
		B:	Black
		Mix:	Light Gray





            DANGER                            FIRST-AID
--------------------------------     -------------------------
May cause severe irritation.         Eyes - Immediately flush
Do not get in eyes, on skin          eyes with plenty of water
or clothing.                         for at least 15 minutes.
Do not inhale vapors.                Get medical attention.
Wear rubber gloves & aprons.         Skin - Wash immediately
Use with adequate ventilation.       with soap and water.
Wash thoroughly after handling.      Clothing - Remove clothing
For industrial use only.             and wash before reuse.
Keep container closed.
Do not reuse this container.
Spec Sheet Dated: 10/13/86

For more information, contact us at:

How To Order:

Doing Business with Magnolia Plastics



Return to Magnolia Plastics Home Page

Copyright © 1996, Magnolia Plastics, Inc. All Rights Reserved, including the right of reproduction in whole or in part in any form. The stylized Magnolia Plastics logo is a regsitered trademark of Magnolia Plastics, Inc.

Contact Magnolia at sales@magnapoxy.com
Web Page Construction and Maintenance By: IFDS Enterprises, Inc.
Updated: September 26, 1996