Magnolia Plastics Adhesives
Magnobond 6150

Plastics for the Space Age Since 1957


Magnobond 6150, Parts A & B

DESCRIPTION

Magnolia 6150, Parts A and B is a two part adhesive system designed to have high peel strength at room temperature and excellent lap shear values at room temperature and at 180°F.

PROPERTIES 
          Mix Ratio                100 parts by weight A
                                            to
                                    33 parts by weight B

          Cure Schedule:           Cure 12 hours @ R.T. plus one (l)
                                   hour post cure @ 270°F or seven (7)
                                   days at 75°F.

          Shelf Life:              Part A = 12 months
                                   Part B = 12 months

          Specific Gravity:        Compound -     A:  1.00
                                   Curing Agent - B:   .96
                                   Mix -              1.05

          Viscosity @ 77°F:        Compound -    A: 132,200 cps (7/10)
                                   Curing Agent - B: Paste
                                   Mix -             76,000 cps (7/10)

          SPI Classification:       A:  4
                                   B:  4

          T-Peel Strength:         30 PIW Avg.

          Lap Shear @ -65°F        5303 PSI Avg.

          Lap Shear Strength
           @ R.T.                  4960 PSI Avg.

          Lap Shear Strength
           @ 180°F                 1878 PSI Avg.

          Lap Shear Strength
          after 90-Day Immersion
          in JP-4 @ 75°F
          Tested at 75°F           5189 PSI Avg.

           Lap Shear Strength
          after 90-Day Immersion
          in JP-5 @ 75°F
          Tested @ 75°F            5770 PSI Avg.


          Climbing Drum Peel
          Strength, ASTM D1781      102 PIW Avg.


          Pot Life @ 77°F: (3 ounce) 28 minutes
 


            DANGER                            FIRST-AID
--------------------------------     -------------------------
May cause severe irritation.         Eyes - Immediately flush
Do not get in eyes, on skin          eyes with plenty of water
or clothing.                         for at least 15 minutes.
Do not inhale vapors.                Get medical attention.
Wear rubber gloves & aprons.         Skin - Wash immediately
Use with adequate ventilation.       with soap and water.
Wash thoroughly after handling.      Clothing - Remove clothing
For industrial use only.             and wash before reuse.
Keep container closed.
Do not reuse this container.
Spec Sheet Dated: 02/25/94

For more information, contact us at:

How To Order:

Doing Business with Magnolia Plastics



Return to Magnolia Plastics Home Page

Copyright © 1996, Magnolia Plastics, Inc. All Rights Reserved, including the right of reproduction in whole or in part in any form. The stylized Magnolia Plastics logo is a regsitered trademark of Magnolia Plastics, Inc.

Contact Magnolia at sales@magnapoxy.com
Web Page Construction and Maintenance By: IFDS Enterprises, Inc.
Updated: September 26, 1996