Magnolia Plastics Adhesive Magnobond 6289
Plastics for the Space Age Since 1957
Magnobond 6289, Parts A & B
DESCRIPTION
Magnobond 6289 is a two part epoxy resin system designed for bonding
applications requiring outstanding chemical and temperature resistance.
This product is used for sealing filters which operate under extremely
harsh conditions.
SPECIAL FEATURES
l. Outstanding resistance to solvents.
2. 350°F temperature resistance.
3. Cures quickly at room temperature.
4. Does not wick excessively into filter paper.
PROPERTIES
Specific Gravity: A: 1.2
B: 1.0
Mix: 1.1
Viscosity, Mix: 75°F 40,000 cps
100°F 20,000 cps
3 oz. Pot Life @ 75°F: 18 minutes
Mix Ratio: 100 Parts by Weight A
32 Parts by Weight B
Special Note: For best acid resistance, use 100 to 27. All others use
100 to 32.
Cure Schedule: Set 2 - 6 hours at 75°F. Good properties can be
obtained with a room temperature cure. For best chemical
resistance, post cure 2 hours at 250°F.
Chemical Resistance, Lap Shear Strength
After Soaking at 75°F. ASTM D-1002
Chemical Days Soaked PSI
MEK 0 2200
MEK 30 2100
MEK 60 2100
Toluene 0 2200
Toluene 30 2200
Toluene 60 2300
Water 0 2200
Water 30 2400
Water 60 2400
Water 120 2300
Water 488 2400
Water 730 2500
Water 2300 2400
Lap Shear Strength, ASTM D 1002,
Tested at Various Temperatures
Test Temperature PSI
75°F 2200
200°F 2300
270°F 1900
350°F 1100
Volume Resistivity,, ASTM D-257
Test Temperature Ohm-cm
75°F 4.88 X 1014
200°F 2.44 X 1014
Dielectric Strength, 1/8 inch, volts/mil 709
DANGER FIRST-AID
-------------------------------- -------------------------
May cause severe irritation. Eyes - Immediately flush
Do not get in eyes, on skin eyes with plenty of water
or clothing. for at least 15 minutes.
Do not inhale vapors. Get medical attention.
Wear rubber gloves & aprons. Skin - Wash immediately
Use with adequate ventilation. with soap and water.
Wash thoroughly after handling. Clothing - Remove clothing
For industrial use only. and wash before reuse.
Keep container closed.
Do not reuse this container.
Spec Sheet Dated: 11/13/95
For more information, contact us at:
Sales Division
Magnolia Plastics, Inc.
5547 Peachtree Industrial Boulevard
Chamblee, GA 30341-2296 USA
770-451-2777, Voice
770-451-5376, FAX
800-831-8031, Voice
Email: sales@magnapoxy.com
How To Order:
Doing Business with Magnolia Plastics
Return to Magnolia Plastics Home Page
Copyright © 1996, Magnolia Plastics, Inc. All Rights Reserved, including
the right of reproduction in whole or in part in any form. The stylized Magnolia Plastics logo is a
regsitered trademark of Magnolia Plastics, Inc.
Contact Magnolia at sales@magnapoxy.com
Updated: September 26, 1996
