Magnolia Plastics Adhesives
Magnobond 6367

Plastics for the Space Age Since 1957


Magnobond 6367, Parts A & B

DESCRIPTION

Magnobond 6367, Parts A and B, is a two component epoxy adhesive designed to have low viscosity for injection repair.

SPECIAL FEATURES

6367 is QPL listed on Bell Specification 299-947-100, Type II, Class 3. and on Rohr Specification RMS 027, Type V, Class 2, Grade D.

PROPERTIES 
                            Part A           Part B          Mix
       Specific Gravity     1.12             0.98            1.07
       Viscosity            188,000 cps      200 cps         3,900 cps
       Shelf Life           12 mo. @ 80°F    12 mo. @ 80°F
       SPI Classification   4                4
       Flash Point          >200°F           >200°F
       Freight Class        1                2
MIXING INSTRUCTIONS 
(NOTE:  STIR BOTH COMPONENTS THOROUGHLY PRIOR TO USE)

       Mix Ratio, (A:B), parts by weight:     100:44
       3 ounce Pot Life @ 77°F:               58 minutes
       Cure Schedule:                         7 days @ Room Temperature
                                                      or
                                              1 hour @ 150-250°F
CURED PROPERTIES 
        Lap Shear Strength, ASTM D1002, 2024 T-3 Aluminum, FPL Etch
             Test Temperature                 PSI, Average
                   75°F                          4390
                  300°F                          1434
                  350°F                           709
                  400°F                           562

        Peel Strength, ASTM D-3167, 2024 T-3 Aluminum, FPL Etch
              Test Temperature                PIW, Average
                   75°F                           4.0

 


            DANGER                            FIRST-AID
--------------------------------     -------------------------
May cause severe irritation.         Eyes - Immediately flush
Do not get in eyes, on skin          eyes with plenty of water
or clothing.                         for at least 15 minutes.
Do not inhale vapors.                Get medical attention.
Wear rubber gloves & aprons.         Skin - Wash immediately
Use with adequate ventilation.       with soap and water.
Wash thoroughly after handling.      Clothing - Remove clothing
For industrial use only.             and wash before reuse.
Keep container closed.
Do not reuse this container.
Spec Sheet Dated: 03/12/93

For more information, contact us at:

How To Order:

Doing Business with Magnolia Plastics



Return to Magnolia Plastics Home Page

Copyright © 1996, Magnolia Plastics, Inc. All Rights Reserved, including the right of reproduction in whole or in part in any form. The stylized Magnolia Plastics logo is a regsitered trademark of Magnolia Plastics, Inc.

Contact Magnolia at sales@magnapoxy.com
Web Page Construction and Maintenance By: IFDS Enterprises, Inc.
Updated: September 26, 1996