Magnolia Plastics Adhesives
Magnobond 6394

Plastics for the Space Age Since 1957


Magnobond 6394, Parts A & B
Also Known As
Magnolia 99-058, Parts A & B

DESCRIPTION

Magnobond 6394, A & B and Magnolia 99-058, A & B are two part epoxy adhesives giving good properties at elevated temperatures. These products are non-metallic versions of Magnolia 6392.

PROPERTIES 
          Mix Ratio:              100:27 parts by weight
          3 oz. Pot Life:         97 minutes at 77`F
          Cure Schedule:          7 days room temperature or 1-2 hours
                                 150-250`F
                                  Note:  At room temperature, most of the
                                 curing process is completed during the first
                                 12 to 24 hours.
             Lap Shear Strength, ASTM D1002, Aluminum to Aluminum
          Test Condition                            Result, psi

              75`F                                 4,000
             300`F                                 1,424
             -67`F                                 3,666
         30 days at 120`F and 100%
           Relative Humidity                       3,834
         7 days in Hydraulic Oil                   4,158
         7 days in JP-4                            4,070
                          Creep Rupture per MMM-A-132A
          75`F - 1600 psi                           <0.005 inches
        180`F -  800 psi                           <0.005 inches

 Testing to FMS-4500A, Form 2 - Non-Metallic Filler
                                Test Values, psi

 Test Conditions       5 day/R.T. Cure   2 hour/200`F Cure   Requirement

10 minutes at -67`F        2,700             4,400              2,000
75`F                       3,700             3,400              3,000
10 minutes at 200`F        2,100             2,600              2,000
10 minutes at 300`F        1,500             1,800              1,300
 7 days water immersion
         75`F              4,500             4,200              3,000
        200`F              2,000             2,200              1,800
 7 days condensing humidity
         75`F              3,900             4,600              3,000
        200`F              2,100             2,500              1,800
 7 days MIL-L-7808 (Engine Oil)
         75`F              4,100             3,600              2,700
        200`F              2,300             2,600              2,000
 7 days MIL-H-83282 (Hydraulic Oil)
         75`F              4,200             3,500              2,700
        200`F              2,300             2,300              2,000
 7 days MIL-H-5606 (Hydraulic Oil)
         75`F              3,800             3,700              2,700
        200`F              2,500             2,400              2,000
 7 days MIL-T-5624 (JP-4)
         75`F              3,800             3,900              2,700
        200`F              2,200             3,200              2,000
 7 days MIL-A-8243 (Anti-icing)
   Type I
         75`F              5,000             3,600              2,700
        200`F              3,200             2,100              2,000
   Type II
         75`F              5,000             3,600              2,700
        200`F              2,700             2,400              2,000
 


            DANGER                            FIRST-AID
--------------------------------     -------------------------
May cause severe irritation.         Eyes - Immediately flush
Do not get in eyes, on skin          eyes with plenty of water
or clothing.                         for at least 15 minutes.
Do not inhale vapors.                Get medical attention.
Wear rubber gloves & aprons.         Skin - Wash immediately
Use with adequate ventilation.       with soap and water.
Wash thoroughly after handling.      Clothing - Remove clothing
For industrial use only.             and wash before reuse.
Keep container closed.
Do not reuse this container.
Spec Sheet Dated: 02/26/92

For more information, contact us at:

How To Order:

Doing Business with Magnolia Plastics



Return to Magnolia Plastics Home Page

Copyright © 1996, Magnolia Plastics, Inc. All Rights Reserved, including the right of reproduction in whole or in part in any form. The stylized Magnolia Plastics logo is a regsitered trademark of Magnolia Plastics, Inc.

Contact Magnolia at sales@magnapoxy.com
Web Page Construction and Maintenance By: IFDS Enterprises, Inc.
Updated: September 26, 1996