Magnolia Plastics Syntactic 6663-1

Plastics for the Space Age Since 1957


Magnobond 6663-1, Parts A & B

DESCRIPTION

Magnolia 6663-1 is a high strength two part epoxy potting compound designed to meet the requirements of General Dynamics Specification FMS 1026D.

SPECIAL FEATURES

Magnolia 6663-1 meets the handling properties of Class III, Type A.

PROPERTIES 
   Mix Ratio:                  100 parts by weight A
                                        to
                                15 parts by weight B

   Pot Life, 3 fl. ozs.
   at 77°F:                    40 minutes

   Cure Schedule:              24 to 48 hours at 75°F

   Shelf Life:                 6 months at room temperature
                            Note:  Containers must be kept tightly
                                   sealed at all times.

   Density:                    99.9 lbs. per cubic ft.

   Viscosity:                     A = 560,000 cps
                                  B =     500 cps
                            Mixture =  45,000 cps

   Compressive Strength, psi:
                                75°F                15,000
                               270°F                 6,700

6663-1 was formerly called 92-066, A and B.



            DANGER                            FIRST-AID
--------------------------------     -------------------------
May cause severe irritation.         Eyes - Immediately flush
Do not get in eyes, on skin          eyes with plenty of water
or clothing.                         for at least 15 minutes.
Do not inhale vapors.                Get medical attention.
Wear rubber gloves & aprons.         Skin - Wash immediately
Use with adequate ventilation.       with soap and water.
Wash thoroughly after handling.      Clothing - Remove clothing
For industrial use only.             and wash before reuse.
Keep container closed.
Do not reuse this container.
Spec Sheet Dated: 02/03/89

For more information, contact us at:

How To Order:

Doing Business with Magnolia Plastics



Return to Magnolia Plastics Home Page

Copyright © 1996, Magnolia Plastics, Inc. All Rights Reserved, including the right of reproduction in whole or in part in any form. The stylized Magnolia Plastics logo is a regsitered trademark of Magnolia Plastics, Inc.

Contact Magnolia at sales@magnapoxy.com
Web Page Construction and Maintenance By: IFDS Enterprises, Inc.
Updated: September 26, 1996