Magnolia Plastics Magnobond 8006, A & B

(Formerly Called 103-030, A & B)
Plastics for the Space Age Since 1957


Magnobond 8006, Parts A & B

DESCRIPTION

Magnobond 8006, A & B is a two part electrically conductive epoxy adhesive system designed to mee the requirements of MMM-A-1931, Type II. Meets or exceeds requirements of MIS 23416 N/R.

PROPERTIES:

Mix Ratio:100:57 Parts By Weight (A:B)
Cure Schedule:24 hours at room temperature or 30 minutes at 150°F - 200°F
Shelf Life:Part A: 6 months
Part B: 6 months
Viscosity @ 77°F:A: Compound - Paste
B: Curing Agent - Paste
Mix: Semi-Paste
Tensile Shear Strength:@ 23°C - 1303 psi
@ 60°C - 1268 psi
@ -55°C - 1482 psi
Sag Flow:0.1
Volume Resistivity, ohm-cm:0.00015
SPI Classification:A: 4; B: 4
Freight Classification:A: 1; B: 2





            DANGER                            FIRST-AID
--------------------------------     -------------------------
May cause severe irritation.         Eyes - Immediately flush
Do not get in eyes, on skin          eyes with plenty of water
or clothing.                         for at least 15 minutes.
Do not inhale vapors.                Get medical attention.
Wear rubber gloves & aprons.         Skin - Wash immediately
Use with adequate ventilation.       with soap and water.
Wash thoroughly after handling.      Clothing - Remove clothing
For industrial use only.             and wash before reuse.
Keep container closed.
Do not reuse this container.
Spec Sheet Dated: 01/08/90

For more information, contact us at:

How To Order:

Doing Business with Magnolia Plastics



Return to Magnolia Plastics Home Page

Copyright © 1997, Magnolia Plastics, Inc. All Rights Reserved, including the right of reproduction in whole or in part in any form. The stylized Magnolia Plastics logo is a regsitered trademark of Magnolia Plastics, Inc.

Contact Magnolia at sales@magnapoxy.com
Web Page Construction and Maintenance By: IFDS Enterprises, Inc.
Updated: March 31, 1997