Magnolia Plastics Magnobond 8007
(Formerly Called 107-145)
Plastics for the Space Age Since 1957
Magnobond 8007, Single Component
DESCRIPTION
Magnobond 8007 is single component epoxy adhesive system designed to have a high degree of electrical conductivity, outstanding thermal resistance and low levels of ionic contamination.
SPECIAL FEATURES:
1. Low ionic concentration. Each bath is checked using an ion chromatograph.
2. High Tg. Magnobond 8007 is made form highly purified, temperature resistant epoxy resins and curing agents. Weight loss values are low even after 1,000 hours at 180°C.
3. 100% Reactive. There is no solvent to evaporate from dispensing tanks and, therefore, no viscosity drift during application. With no volatiles released during cure, void density in the cured film is low.
PROPERTIES OF UNCURED MATERIAL:
| Specific Gravity: | 2.8 | |
| Viscosity @ 23°C: | 194,000 | |
| Shelf Life From Ship Date: | 1 year @ -40°C or 30 days @ 23°C |
| SPI Classification: | 2 |
| Flash Point: | >100°C |
| Freight Classification: | 1 |
| Suggested Cure Schedule: * | 1 to 3 hours @ 150°C to 200°C |
| |
| * 1 hour @ 200°C was used for test data |
PROPERTIES OF CURED MATERIAL:
DANGER FIRST-AID
-------------------------------- -------------------------
May cause severe irritation. Eyes - Immediately flush
Do not get in eyes, on skin eyes with plenty of water
or clothing. for at least 15 minutes.
Do not inhale vapors. Get medical attention.
Wear rubber gloves & aprons. Skin - Wash immediately
Use with adequate ventilation. with soap and water.
Wash thoroughly after handling. Clothing - Remove clothing
For industrial use only. and wash before reuse.
Keep container closed.
Do not reuse this container.
Spec Sheet Dated: 10/22/93
For more information, contact us at:
Sales Division
Magnolia Plastics, Inc.
5547 Peachtree Industrial Boulevard
Chamblee, GA 30341-2296 USA
770-451-2777, Voice
770-451-5376, FAX
800-831-8031, Voice
Email: sales@magnapoxy.com
How To Order:
Doing Business with Magnolia Plastics
Return to Magnolia Plastics Home Page
Copyright © 1997, Magnolia Plastics, Inc. All Rights Reserved, including
the right of reproduction in whole or in part in any form. The stylized Magnolia Plastics logo is a
regsitered trademark of Magnolia Plastics, Inc.
Contact Magnolia at sales@magnapoxy.com
Updated: March 31, 1997
