Magnobond 91, Parts A & B

1. Meets requirements of BMS 5-28, Rev. V, Type 17.
2. Magnobond 91 has outstanding flame retardance, including low smoke density.

     Magnobond 91, Part A         100 Parts by weight
     Magnobond 91, Part B          22 Parts by weight

     24 hours at 75°F or 5 hours at 125°F.

                                                    BMS 5-28
PROPERTIES                    MAGNOBOND 91        REQUIREMENTS
----------                    -------------       ------------------
Gel Time, R.T., Minutes       65-70 minutes        60 minutes

Flow, in., R.T.                 < 0.1             0.2 maximum
           125°F                < 0.1             0.2 maximum

Density, Grams/cc             0.680-0.700         0.7 maximum

Compressive Strength, psi        7,000              6,500 minimum

Compressive Modulus, psi       305,000            250,000 minimum

Tensile Shear Strength, psi      1570               1,000 minimum

Flammability, Horizontal      Self-extinguishing  Self-extinguishing
              Vertical        Self-extinguishing  Self-extinguishing
                                                  within 10 seconds

Immersion, % Weight Gain,
24 hours, R.T.
     Diesel Fuel                 0.56             1.5 maximum
     Hydraulic Oil               0.54             2.6 maximum
     Distilled Water             0.53             2.5 maximum

Handling Properties           Satisfactory        Satisfactory

Dielectric Constant
     R.T., 9.375 GHz             2.09

Loss Tangent
     R.T., 9.375 GHz             0.020



            DANGER                            FIRST-AID
--------------------------------     -------------------------
May cause severe irritation.         Eyes - Immediately flush
Do not get in eyes, on skin          eyes with plenty of water
or clothing.                         for at least 15 minutes.
Do not inhale vapors.                Get medical attention.
Wear rubber gloves & aprons.         Skin - Wash immediately
Use with adequate ventilation.       with soap and water.
Wash thoroughly after handling.      Clothing - Remove clothing
For industrial use only.             and wash before reuse.
Keep container closed.
Do not reuse this container.

Spec Sheet Dated: 03/22/93

Sales Division
Magnolia Plastics, Inc.
5547 Peachtree Industrial Boulevard
Chamblee, GA 30341-2296  USA
770-451-2777, Voice
770-451-5376, FAX
800-831-8031, Voice
Email:   sales@magnapoxy.com

How To Order:

Copyright © 1996, Magnolia Plastics, Inc. All Rights Reserved, including the right of reproduction in whole or in part in any form. The stylized Magnolia Plastics logo is a regsitered trademark of Magnolia Plastics, Inc.

Contact Magnolia at sales@magnapoxy.com

Web Page Construction and Maintenance By: IFDS Enterprises, Inc.