Magnolia Plastics Syntactic 92-1

Plastics for the Space Age Since 1957


Magnobond 92-1, Parts A & B

DESCRIPTION

Magnobond 92-1, Parts A & B is a high strength flame retardant potting system for metal, plastic and paper honeycomb core.

SPECIAL FEATURES
MIX RATIO 
     Magnobond 92-1, Part A         100 parts by weight
     Magnobond 92-1, Part B          20 parts by weight
CURE SCHEDULE 
     24 hours at 77°F or 5 hours at 125°F
SHELF LIFE 
     6 months at room temperature
PROPERTIES 
     All data below on test specimens cured for 5 hours at 125°F.  Test
     per BMS 5-28, Revision V, Type 18, Class 1


     Test                            92-1         REQUIREMENT
Gel Time, minutes                    14-15           12-25
Density, grams/cc                    0.65         0.7 maximum
Compressive Strength, psi            5200         4500 minimum
Tensile Shear Strength, psi          1900         1000 minimum
Flammability,
     Horizontal               Self-Extinguishing  Self-Extinguishing
     Vertical
     Ext. Time, seconds              0            15 maximum
     Burn length, inches             2.0           8 maximum
     Drip Ext. Time, seconds       No Drip         5 maximum

Fluid Immersion,
     Weight Gain, %
     TT-S-735, Type III Test Fluid  0.76          1.5 maximum
     MIL-H-5606 Hydraulic Fluid     0.74          2.6 maximum
     Monsanto Low Density Hydraulic
        Test Fluid                  0.92-1          5.0 maximum
     Distilled Water                1.00          2.5 maximum
Extrudability, grams/minute       180-220         140 minimum
Slump, inches                     0.1-0.2         0.3 maximum
Compressive Modulus, psi          290,000         200,000 minimum




            DANGER                            FIRST-AID
--------------------------------     -------------------------
May cause severe irritation.         Eyes - Immediately flush
Do not get in eyes, on skin          eyes with plenty of water
or clothing.                         for at least 15 minutes.
Do not inhale vapors.                Get medical attention.
Wear rubber gloves & aprons.         Skin - Wash immediately
Use with adequate ventilation.       with soap and water.
Wash thoroughly after handling.      Clothing - Remove clothing
For industrial use only.             and wash before reuse.
Keep container closed.
Do not reuse this container.
Spec Sheet Dated: 08/04/95

For more information, contact us at:

How To Order:

Doing Business with Magnolia Plastics



Return to Magnolia Plastics Home Page

Copyright © 1997, Magnolia Plastics, Inc. All Rights Reserved, including the right of reproduction in whole or in part in any form. The stylized Magnolia Plastics logo is a regsitered trademark of Magnolia Plastics, Inc.

Contact Magnolia at sales@magnapoxy.com
Web Page Construction and Maintenance By: IFDS Enterprises, Inc.
Updated: September 24, 1997
SemKits is a Registered Trademark of Courtaulds Aerospace.