Magnolia Plastics Syntactic 94 and 95

Plastics for the Space Age Since 1957


Magnobond 94 and 95, Parts A & B

DESCRIPTION

Magnobond 94 and 95 are high strength epoxy potting, shimming and bonding compounds designed for use between -67°F and +350°F.

SPECIAL FEATURES
PROPERTIES 
     Mix Ratio:                      100 parts A
                                      10 parts B

     Specific Gravity:                 A:  1.63
                                       B:  0.94
                                     Mix:  1.54

     Pot Life, 3 oz. mass:           120 minutes

     Cure Schedule:                6 to 24 hours @ 75°F
                                      followed by
                                   2 hours at 200°F
                                        plus
                                   1 hour at 350°F

     Shelf Life:                   6 months at 80°F or lower
                                  12 months at 40°F or lower

     Density at 77°F:                0.054 lbs./cu in

     Adhesive Strength, 350°F        1834 lbs./inch

                            Magnobond_94        Magnobond_95
     Viscosity:           A:  1,400,000 cps         Paste
                          B:         90 cps         Paste
                        Mix:     85,000 cps         Paste

                        Flow:                     < 0.01


     Compressive Strength @ 77°F       13,900 lbs./inch
     at 0.032 inch deformation:

     Compressive Strength @ 350°F
     at 0.45 inch deformation:         11,000 lbs./inch

     Machineability:                         Pass

     Impact Resistance:                      Pass

     Voids:                                  Pass



            DANGER                            FIRST-AID
--------------------------------     -------------------------
May cause severe irritation.         Eyes - Immediately flush
Do not get in eyes, on skin          eyes with plenty of water
or clothing.                         for at least 15 minutes.
Do not inhale vapors.                Get medical attention.
Wear rubber gloves & aprons.         Skin - Wash immediately
Use with adequate ventilation.       with soap and water.
Wash thoroughly after handling.      Clothing - Remove clothing
For industrial use only.             and wash before reuse.
Keep container closed.
Do not reuse this container.
Spec Sheet Dated: 03/11/94

For more information, contact us at:

How To Order:

Doing Business with Magnolia Plastics



Return to Magnolia Plastics Home Page

Copyright © 1996, Magnolia Plastics, Inc. All Rights Reserved, including the right of reproduction in whole or in part in any form. The stylized Magnolia Plastics logo is a regsitered trademark of Magnolia Plastics, Inc.

Contact Magnolia at sales@magnapoxy.com
Web Page Construction and Maintenance By: IFDS Enterprises, Inc.
Updated: March 31, 1996