Magnolia Plastics products have been octa-BDE and penta-BDE free since 2001 in accordance with the dictates of the European Union.

Magnolia has developed over 2,000 products since our inception in 1957. More than 700 of these are currently in active use in diverse industries around the globe. Of these are our widely accepted line of epoxy based adhesives suitable for many different and diverse applications.

Many of our Adhesives are qualified to various manufacturer and government specifications:

• Qualified Product List By Magnolia Product
• Qualified Product List By Magnolia Customer
• Qualified Product List By Specification

To see the Technical Data Sheets of our "Adhesives Top Eleven", please click below.

1. Magnobond 55-2, Parts A&B - A Structural Adhesive with Excellent Resistance to Solvents, Oils, Gasoline, Water, Salt Solutions, and a Wide Variety of Industrial Chemicals Including Acids, and Alkalis. Qualified to Raytheon G530730.

2. Magnobond 56, Parts A&B - A High Strength Epoxy Adhesive Designed for Bonding Fiberglass Panels to a Wide Variety of Substrates.

3. Magnobond 58 and 58-2, Parts A&B - A Compound with Good Adhesion to Wood, Brick, Concrete, Steel, Aluminum and Some Plastics. Excellent High Strength Patches to Molded Fiberglass Parts and Molds Can Be Made Quickly with Magnobond 58 and 58-2.

4. Magnobond 65, Parts A&B - A Fast Curing Two Part Epoxy Adhesive System.

5. Magnobond 6155, Parts A&B - A Two Part Epoxy System That Has Balanced High Peel Strength and Good Shear Strength at Room Temperature and at 160°F.

6. Magnobond 6175-NM (Single Component) - Magnobond 6175-NM is a Non Metallic Filled Single Component Epoxy Adhesive System Designed for those Applications Requiring High Bond Strength and/or Electrical Insulation. Qualified to Brunswick BMS-D11309.

7. Magnobond 6289, Parts A&B - Magnobond 6289 is a Two Part Epoxy Resin System Designed for Bonding Applications Requiring Outstanding Chemical and Temperature Resistance. This Product is Used for Sealing Filters which Operate Under Extremely Harsh Conditions.

8. Magnobond 6380, Parts A&B - Magnobond 6380 is a Toughened Epoxy Adhesive/Shim System Having Good Properties Over a Wide Range of Temperatures. Qualified to:

• Boeing/Sikorsky Specification 2000-777-016, 0-02-DASH-001A
• Boeing/Sikorsky Spec 2000-777-016, 0-02, DASH-001A
• Rockwell MBO-120-037, Type II, Class I
• Sikorsky SS 8622-007A

9. Magnobond 6388-3, Parts A&B - Magnobond 6388-3 is a Two Part Epoxy Adhesive/Shim System Designed to Have Good Bond Strength Over a Wide Range of Temperatures (-67°F to 300°F). Magnobond 6388-3 Can Be Cured at Room Temperature or Accelerated with Heat. Qualified to:

• Lockheed Martin FMS 1048G
• Lockheed Martin FMS 1048E
• LTV 207-8-438A
• MMM-A-132B, Type I, Class III, Group I, Form P
• MMM-A-134, Type I, II
• National Stock Number 8040-00-270-8137
• Northrop MS 277
• Raytheon Drawing L 3137AS5331
• Raytheon MIS 38151
• Rockwell Spec MBO-120-008, Class I
• WS 25019

• 9. Magnobond 6388-5, Parts A&B - Magnobond 6388-5 is a more fluid, injection grade version of Magnobond 6388-3. Like Magnobond 6388-3, it is a Two Part Epoxy Adhesive/Shim System Designed to Have Good Bond Strength Over a Wide Range of Temperatures (-67°F to 300°F). Magnobond 6388-5 Can Be Cured at Room Temperature or Accelerated with Heat. Qualified to Kaman KPS 395.

11. Magnobond 6398, Parts A&B - Magnobond 6398 is a Two Component Thixotropic Paste Epoxy System Designed for Bonding Metals and Composite Structures. Qualified to:

• Bell Helicopter/Textron 299-947-100, Type II, Class 2 
• Bell Helicopter/Textron 299-947-359, Type I
• GAA100BD08
• Lockheed Martin LMA-ML111, Type 1
• Raytheon Specification BS 201
• Rockwell Spec RBO-120-023
• Textron/Bell Helicopter 299-947-100, Type II, Class 2
• Textron/Bell Helicopter 299-947-359, Type I
  
  

The products listed above are only a few of the many adhesives solutions produced by Magnolia Plastics to a wide variety of specifications and for a wide range of general and specialized uses.

For further information or to submit a purchase order, please contact us at:

     Sales Division Magnolia Plastics, Inc. 
     5547 Peachtree Industrial Boulevard 
     Chamblee, GA 30341-2296 USA
     770-451-2777, Voice
     770-451-5376, Fax
     800-831-8031, Voice
     Email: websales@magnoliaplastics.com

Copyright © 2007, Magnolia Plastics, Inc. All Rights Reserved, including the right of reproduction in whole or in part in any form.
The stylized Magnolia Plastics logo is a registered trademark of Magnolia Plastics, Inc.

Contact Magnolia at websales@magnoliaplastics.com

Updated: Saturday, September 22, 2007 22:21