| |
Magnolia Plastics Coatings
Providing Innovative, High-Performance Stock and Custom Formulated
Epoxy Systems Since 1957
Magnolia Plastics products have been octa-BDE and penta-BDE free since
2001 in accordance with the dictates of the European Union.
Magnolia has developed over 2,000 products since our inception in 1957.
More than 700 of these are currently in active use in diverse industries
around the globe. Of these are our widely accepted line of epoxy based
coatings suitable for many different and diverse applications. To see
the Technical Data Sheets of our "Coatings Top Ten", please
click below.
1. Magnobond 55-2, Parts A&B - A Structural
Adhesive with Excellent Resistance to Solvents, Oils, Gasoline, Water,
Salt Solutions, and a Wide Variety of Industrial Chemicals Including Acids,
and Alkalis.
2. Magnobond 56, Parts A&B - A High Strength Epoxy
Adhesive Designed for Bonding Fiberglass Panels to a Wide Variety of Substrates.
3. Magnobond 58 and 58-2, Parts A&B - A Compound
with Good Adhesion to Wood, Brick, Concrete, Steel, Aluminum and Some
Plastics. Excellent High Strength Patches to Molded Fiberglass Parts and
Molds Can Be Made Quickly with Magnobond 58 and 58-2.
4. Magnobond 65, Parts A&B - A Fast Curing Two
Part Epoxy Adhesive System.
5. Magnobond 6155, Parts A&B - A Two Part Epoxy
System That Has Balanced High Peel Strength and Good Shear Strength at
Room Temperature and at 160°F.
6. Magnobond 6175-NM (Single Component) - Magnobond
6175-NM is a Non Metallic Filled Single Component Epoxy Adhesive System
Designed for those Applications Requiring High Bond Strength and/or Electrical
Insulation.
7. Magnobond 6289, Parts A&B - Magnobond 6289
is a Two Part Epoxy Resin System Designed for Bonding Applications Requiring
Outstanding Chemical and Temperature Resistance. This Product is Used
for Sealing Filters which Operate Under Extremely Harsh Conditions.
8. Magnobond 6380, Parts A&B - Magnobond 6380
is a Toughened Epoxy Adhesive/Shim System Having Good Properties Over
a Wide Range of Temperatures.
9. Magnobond 6388-3 and 6388-5, Parts A&B -
Magnobond 6388-3 is a Two Part Epoxy Adhesive/Shim System Designed to
Have Good Bond Strength Over a Wide Range of Temperatures (-67°F to 300°F).
Magnobond 6388-3 Can Be Cured at Room Temperature or Accelerated with
Heat. This system meets the requirements of FMS 1048E. A More
Fluid, Injection Grade Version, Magnobond 6388-5 is Also Available.
10. Magnobond 6398, Parts A&B - Magnobond 6398
is a Two Component Thixotropic Paste Epoxy System Designed for
Bonding Metals and Composite Structures.
The products listed above are only a few of the many coatings systems
produced by Magnolia Plastics to a wide variety of specifications and
for a wide range of general and specialized uses.
|
.
After completing the application, please fax to us at 770-451-5376 for
consideration.